Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Blower motor lubrication with drill holes - BS, or good idea? 200 1993

posted by  nullspacebasis on  Wed Mar 20 01:42 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have my dash apart in my 1993 244 for other business and thought I might give the idea of lubing the blower motor, because it has started to whine on the first 2 settings.

I have seen some posts, but have not seen much supporting trials.

http://www.sonic.net/~zipzippy/volvo/blower%20motor.html

This one suggests just drilling 2 holes through the front of the white housing.

https://www.brickboard.com/RWD/index.htm?id=1606742&show_all=2

This one suggests drilling through motor housing.


Anyone have experience with this?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Blower motor lubrication with drill holes - BS, or good idea? [200][1993]
posted by  nullspacebasis  on Wed Mar 20 01:42 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.