Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil Seal on Intermediate Camshaft Stuck 200 1988

posted by  1908242DLa on  Sun Dec 16 14:42 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 00:47 CST 2014
[RELATED]

My camshaft oil seal is leaking badly - oil present on the camshaft in front of the seal and oil on top of the water pump housing (less than 300 miles after changing a water pump due to a leak at the top.

The camshaft seal slid right off with a flathead screwdriver - easy peasy; by the way, it was orange. However, the intermediate oil seal is stuck; it feels rigid and is black.

It does not appear to be leaking oil, as the intermediate shaft in front of the oil seal is dry and there's no oil tracks below it.

Any tips on getting it out?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Seal on Intermediate Camshaft Stuck [200][1988]
posted by  1908242DLa  on Sun Dec 16 14:42 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.