Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Windshield wiper CAMs and connecting wires... 200 1990

uid 33936's pic
posted by  TheBrickTank on  Wed Jun 20 06:54 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:54 CST 2014
[RELATED]

So my son and I are working on his 1990 245.

We remove the entire wiper assembly, re-grease everything and then re-install it.

Everything was working great, or so I thought before we re-installed the dash.

He pulls the car out of the garage last night and runs the wipers once. They cycle once then stop.

I don't believe him, so he shows me and sure enough, I can hear the motor running, but no one's home in the wiper stalks.

I pull the glove box and I notice that the wire has come undone on the CAM connecting the drive metal from the motor. WTF???

So I may have to pull the dash again to fix this, but my real question is HOW did this happen and why, and how do I make sure it doesn't happen again?

As always, thanks in advance,

Matt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Windshield wiper CAMs and connecting wires... [200][1990]
posted by  TheBrickTank  on Wed Jun 20 06:54 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.