Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Changing heater pipe seal without removing water pump- is there enough room? 700 1992

posted by  rstarkie on  Sat Jan 20 16:11 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

1992 745 NA 220K

I removed the water pump on my son's wagon last weekend to fix the leak at the seal between the pump and the head.

He called today to say the seal on the heater pipe on the back side of the water pump is dripping coolant. I have installed a lot of b230f water pumps but this is the first one that I have screwed up.

I would rather not remove the pump again. It would seem that I might be able to cheat my way to a shortcut. Has anyone removed the bolt that holds the pipe to the block and been able to move the pipe back enough to get it free of the pump to get at the seal on the pipe?

Thanks,
Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Changing heater pipe seal without removing water pump- is there enough room? [700][1992]
posted by  rstarkie subscriber  on Sat Jan 20 16:11 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.