Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2001 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

High Beam and O/D Indicator Light Dimmer 1800 1973

posted by  Chris Mullet on  Fri Dec 8 19:00 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:08 CST 2014
[RELATED]

OK, here's a couple questions. There's a small switch under the dash, by the driver's vent control, that dims the O/D and high beam indicator lights by means of a couple internal resistors - separate resistors for each of the indicators. The back of the switch says one terminal is 39 ohms and the other is 100 ohms. So which indicator is wired to which terminal?

Also was there a standard for whether you throw the switch UP or DOWN for dimming? (I know, I need to get a life.)

Also is there a standard location to mount the flasher unit. Mine is hanging from the harness right now and it looks like it might mount on the back of the speedo or tach by one of the thumb nuts. The flare has a small hole for mounting, it's not one of barbed clip-on things.

Thanks again!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 High Beam and O/D Indicator Light Dimmer [1800][1973]
posted by  Chris Mullet subscriber  on Fri Dec 8 19:00 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.