Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Small oil filter lines bracket not connected..? 700

posted by  DPNY on  Sat Oct 8 08:17 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 18 18:45 CST 2014
[RELATED]

Hi - I changed my oil filter recently. It had been overtightened and I had to bang with a chisel etc to get it off. After replacement of new filter and oil I have an oil drip did not previously have. On examination the oil lines that feed the filter are oily and it seems also a small bracket that might be designed to hold in place is not secured.

I have a pic. The bracket is small and has an open end that looks like it is supposed to go to the close by bolt for fastening. The bracket is in the middle of this PIC.

https://www.brickboard.com/IMAGELIB/volvopic.htm?js_link=1&id=12660

Can anyone confirm this small bracket should be secured to the bolt?






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.