Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1985 B21ft Base Idle Setting 200

posted by  dobber13 on  Mon Aug 22 19:23 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 19:10 CST 2014
[RELATED]

When I try ti set base idle (deactivate CIS) and set idle to 800 RPM's it's O.K. untill I take it for a ride. As soon as I let off the gas peddle the idle stays around 1000 to 1150rpms.
So I was told to set a B21ft you need to set the throttle stop set screw so the throttle plate is closed then bring throttle plate 1/4 to 1/2 a turn so it doesn't bind.
When I do this and rev the engine the idle drops almost to stall then it goes to 900rpms. It has stalled a couple of times.
What could cause this to happen?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1985 B21ft Base Idle Setting [200]
posted by  dobber13 subscriber  on Mon Aug 22 19:23 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.