Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AC DIAGNOSIS: NEW AC CYCLING SWITCH DIDN'T ENGAGE CLUTCH 900

posted by  smfree on  Sun Aug 14 07:21 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 28 21:47 CST 2013
[RELATED]

Hi Everyone!

ONGOING ISSUE WITH AC: I replaced my AC cycling (low pressure) switch, but the clutch did not engage on the compressor. However, when the wire plug that connects to that switch was "jumped," the clutch engaged and the AC "pipe" was cold (which is why the switch was suspect).

Any thoughts on what needs to be checked next? There is adequate freon in the system. The shop I go to ordered me the Santech MT0210 Clutch Cycling Switch, which fits my car. Just a tiny bit of freon was released when I took off the old one.

Hoping for some insight!

Thanks much,

Susan
York, PA






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AC DIAGNOSIS: NEW AC CYCLING SWITCH DIDN'T ENGAGE CLUTCH [900]
posted by  smfree  on Sun Aug 14 07:21 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.