Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re try 200

posted by  Ray S on  Sat Aug 29 14:49 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 14:28 CST 2014
[RELATED]

The shifter on my 1993 240 wagon is very loose. The shift lock is not connected and I changed the bushings under the car last year. The looseness is up top as viewed in the picture. Although it may look good, it isn't. I'm thinking that the hole that can be seen in the lower left of the picture should have a bolt/screw that holds the shifter assembly tight. Not sure if bolt should go from top side down or from under side and up. Also what size? Can anyone help? Thanks.







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Re try [200]
posted by  Ray S subscriber  on Sat Aug 29 14:49 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.