Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2023 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

door seals 120-130 1967

posted by  riverbend on  Sun Jun 21 17:16 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

I'm installing new door seals on our '67 220 and to say that it laborious would be a drastic understatement. This car has the later style channel spot welded to the door frame. The manual says to use a screw driver... Poking the inner lip of the new gasket into the channel 1/8" at a time seems to be the most effective way to do it.

Anyone got any tips, tricks, tools, strategies, etc. that make this job easier ?

Second question - there is a gap in the channel at the botton of the door. Should the ends of the gasket meet there ?

Third question - should the new gasket be glued to the hinges ?

Many thanks

Greg





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New door seals [120-130][1967]
posted by  riverbend subscriber  on Sun Jun 21 17:16 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.