Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rack/Pinion Crush Washers 200 1992

posted by  Bradley on  Sat May 2 22:33 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:56 CST 2014
[RELATED]

So, finally going to replace the leaky rack on the wagon so that the Young Princesses can fight over who is not going to get stuck with the Volvo this summer. It's a CAM rack car and I want to assemble all the obscure bits needed beforehand so as not to have to schlep to the parts store for a forgotten part. So, in terms of the crush washers on the rack banjo bolts, what is the correct size. I want to ask for the correct ones, and not have the counter geek try to guess at it.

So, anyone know the size and are they copper, aluminum, or plastic?

Thanks!
B





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rack/Pinion Crush Washers [200][1992]
posted by  Bradley  on Sat May 2 22:33 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.