Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front Strut Spring Mount failure 200

Brought the 83-240 out of winter storage and noted a loud rubbing noise at the right front. Rust had weakened the lower spring mount on the strut tube and it had moved or bent down until it contacted the tire. The prudent thing to do would be to replace both front strut assemblies, but I have searched our usual online suppliers and only found one assembly available (Tasca Volvo at $420!).

I do note that a couple of aftermarket suppliers have the lower spring mount pan available at around $10 as a stand-alone item. I don't know how this is fastened (welding?) to the strut tube, or if it is a recommended fix.

Looking for suggestions on how to fix or should I replace the whole strut assembly? Suggestions also welcome as to a good recycling place that would have rust free (relatively) strut assemblies..ie: USA sunbelt states.

Thanks!
--
Bob: Son's XC70, my 83 244DL, 89 745 (V8) and XC60. Also '77 MGB and some old motorcycles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front Strut Spring Mount failure [200]
posted by  Volvodad subscriber  on Thu Apr 23 09:49 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.