Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replace or repair fuel hose on 1984 DL 200 1984

posted by  pdx 445 on  Wed Apr 15 15:08 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Dec 10 14:39 CST 2013
[RELATED]

I managed to cut the "fuel pipe" (Volvo part 1312382) on my 1984 DL with Bosch LH 2.0 injection. I cut it back a few inches and managed to push it back onto the barbed brass fitting at the fuel rail. The "pipe" is an inner, hard plastic hose with an outer, rubber hose surrounding it.

I found it is NLA from Volvo and ipd (I'm in Portland) has no substitute or workaround. I'm considering splicing the inner hose with a similar hose and splice fitting, but am worried the original inner plastic hose will just crack where it is spliced to the new hose.

Any thoughts? I'm sorry if this has been covered in detail before; I was unable to coax anything related from the search engine.

Mike J.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replace or repair fuel hose on 1984 DL [200][1984]
posted by  pdx 445  on Wed Apr 15 15:08 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.