Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How I Removed a Power Steering Pulley from a Volvo 240 200 1991

How I Removed a Power Steering Pulley from a Volvo 240:

If you try to remove a pulley from a power steering pump with a generic rental tool kit you may encounter a problem - it may not be tight enough to grip the pulley firmly and successfully remove it from the power steering pump shaft. It may slip off the central pulley lip, or bend the lip, because of the loose grip.

After an unsuccessful search for a Volvo tool for the job, and after visiting a local automotive shop that attempted and failed to remove it, I decided to modify a standard pulley removal kit to more tightly grip the Volvo pulley. I purchased the pulley removal kit from a discount store for about $17, then used an angle grinder to modify it. The pulley was then successfully removed within minutes.

The image below shows how I modified the kit. The goal is to grind the parts so that you have the tightest grip possible on the central pulley lip.







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2 How I Removed a Power Steering Pulley from a Volvo 240 [200][1991]
posted by  joe_1991_240  on Tue Dec 30 19:58 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.