Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

cutting holes in old brittle plastic 200 1993

posted by  John Nuttall on  Thu Dec 25 10:13 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 05:04 CST 2014
[RELATED]

Merry Christmas Everyone !

I'm replacing the damaged center console in my '93 245 with a unit from an '89 and i need to cut 2 holes in the forward face of it for mounting the electric mirror control switches.

I test drilled the plastic on the broken console with various wood and metal drill bits I have but each and every bit I tried cracked the plastic.

I'm wondering if I need to "grind" them out with a Dremel tool ?

All tips and suggestions are welcome :-)

John
Raleigh, NC






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New cutting holes in old brittle plastic [200][1993]
posted by  John Nuttall  on Thu Dec 25 10:13 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.