Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2021 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Adding Freon 84 244 ti 200

posted by  dobber13 on  Mon Jun 16 18:10 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 19:10 CST 2014
[RELATED]

I have done this before and had no problems but I was trying to add some today after I found the small leak and it was just the hot side connection that needed to be tightened.
When I was adding freon the gauge showed a drop in kPa by about 70 kPa,does that mean to much was added? If so how can I remove some freon.The temp.runs about 60 degree's,I was trying to get the temp. to around 50 degree's. This was changed over to R134 with all necessary parts for conversion.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Adding Freon 84 244 ti [200]
posted by  dobber13 subscriber  on Mon Jun 16 18:10 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.