Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1996 960 Wagon A/C Issues 900

posted by  mtj8617 on  Sat May 31 21:02 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 3 16:47 CST 2014
[RELATED]

A/C does not stay cold all the time and the fan doesn't blow very hard. The air flow does not change when I press the recirc button, and the air flow turns warm during acceleration. I figure the servo motor needs to be replaced to fix the acceleration issue, but will this fix the recirc button/ air flow issue also?

I don't want to add 134a if it is another issue causing the blowing problem. Should I check the two valves on the firewall and then replace the servo motor first?

Weather is starting to get hot in NC, so I would like to resolve this soon.

Thanks for the help ahead of time.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1996 960 Wagon A/C Issues [900]
posted by  mtj8617  on Sat May 31 21:02 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.