Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2024 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Source for rear brake lines 200

posted by  jstraw on  Sun Mar 16 11:17 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 09:10 CST 2014
[RELATED]

The brakes on my '90 240 started making a thump-thump sound when braking. Found that the rear pads were worn. While replacing the pads, I found a stuck caliper - so it has to come off to be rebuilt. Problem is that I couldn't get the brake line off the old caliper. It's stuck in there real good. Since the nut is now rounded off, I need to replace the brake line. However, I can't seem to find any replacement hard brake lines for the rear. FCP seems to stock the fronts but I don't see any for the rear. Anyone out there have a source for this?

I found this site that seems to stock copper-nickel lines of various sizes:

http://www.jegs.com/p/JEGS-Performan...11534/10002/-1

My measurements show the lines to be 3/16" but I don't know what size the fittings are. Anyone use these before? If so, do you know the fitting sizes needed?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Source for rear brake lines [200]
posted by  jstraw  on Sun Mar 16 11:17 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.