Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Broken Off O-Ring 200 1989

posted by  JCo on  Sat Feb 15 15:03 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Feb 17 19:56 CST 2014
[RELATED]

So I decided to change my oil breather box on my 240 and was able to get the old box off following the directions in the FAQs. However when I pulled the old breather box off I noticed that only half of the o-ring was stuck on the block. I don't know what happened to the other half and am worried that it may have fallen in the hole. What should I do? Should I change the oil and hope that the offending piece gets flushed out?

Jason






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Broken Off O-Ring [200][1989]
posted by  JCo  on Sat Feb 15 15:03 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.