Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2019 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changing instruments 900

posted by  jerryc on  Wed Feb 12 12:07 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 21:28 CST 2014
[RELATED]

I have a 94T, and the fuel gauge is often not 'on'. When it works it seems pretty accurate though. Also, the clock is a bit slow. The other instruments seem to work fine.
I also have the complete panel out of my now gone 93T. The fuel gauge and clock always worked fine, the tach was sometimes indicating too high, then would drop back to correct reading.
So I want to put the working fuel gauge and clock from the 93 into the 94 panel.
The 93 panel will not come apart at the bottom. All screws are out, and the top and sides separate fairly easily. The bottom is really quite stuck, all along the seam. I have not tried prying with tools yet, but a pretty strong guy pulling hard had no effect.
Any thoughts?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Changing instruments [900]
posted by  jerryc  on Wed Feb 12 12:07 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.