As per the advice below, I'm going to pull the gas tank out of my '64 544 and replace it with a nice clean one (many thanks to our own agent_strangelove for the tank!)
My question is about the length of hose between the filler neck on the body of the car, and the filler neck on the tank it self.
What is the length and diameter of this piece of hose?
I know I could pull the old tank out and have my answer, but I want to have all the parts I need on hand to do this job so I can hammer it out quickly.
Any other tips or tricks on this task? I've done a tank replacement on my 122, and it appears at first glance that this will be very similar (aside from the filler neck connection).
More questions to come as I dig deeper into the car. Thanks as always.
--
|