Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Troubleshooting Chrysler ignition on an '83 245 200

posted by  montysano on  Mon Nov 4 16:05 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 29 16:46 CST 2014
[RELATED]

Hi all,

My son's '83 245 has a no-spark condition. Per the Bentley manual, we've confirmed voltage at #15 on the coil, and at #A on the Hall sender plug. We've confirmed voltage at #2 on the ignition control unit, but have been unable to confirm ground at #10. Not sure if this is really a problem, since it's quite difficult to back-probe the connector.

When we did the B-to-C jumper test on the Hall connector, we got no spark, but did hear a chattering sound. Bentley makes no mention of this. Is this sound telling us anything?

Thanks,
Monty
--
Past: '79 245, '91 240, '88 245. Current: '90 245, '83 245, '95 940






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Troubleshooting Chrysler ignition on an '83 245 [200]
posted by  montysano  on Mon Nov 4 16:05 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.