Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hood Seal 700 1990

posted by  spasske on  Mon Apr 22 09:16 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:11 CST 2014
[RELATED]

The hood seal on my wagon is loose and has let water into the distributor cap. The plastic Tees that connect it to holes in the fire wall appear to have pulled through the seal.

Has any just pulled it off and reattached it with plastic pan head screws? I was thinking of drilling a small hole in the seal and using automtive plastic screws to reattach it. I would also add a bit of silicone to seal the drilled hole as well.

I measure the holes with a drill bit to be a hair larger than 1/4 inch.
--
Paul NW Indiana '89 744 Turbo 160K/ '90 745 turbo 140K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hood Seal [700][1990]
posted by  spasske  on Mon Apr 22 09:16 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.