Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine mount question related to B230FT swap 200

posted by  samshay on  Tue Mar 26 12:42 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 11 06:38 CST 2014
[RELATED]

Hi all,

I am about to swap a B230FT into a car which came with a B21. Both cars use a manual M46 so I assume the transmission mount stays the same; however, part numbers for the motor mounts are not the same. I would assume (most dangerous word in the English language) that the difference is in the portion of the mount that contacts the engine, not the chassis, but you know what happens when you assume.

So, my question is... do I order the mounts for the chassis (the car the B230FT is going into) or for the engine (the car the B230FT is coming from)? Or do I need something altogether different? The car gaining the new powerplant is a 1979 242GT, and the donor is a 1986 744Ti. Any help or advice would be appreciated!

~Sam






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine mount question related to B230FT swap [200]
posted by  samshay  on Tue Mar 26 12:42 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.