Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Prepping For Head Gasket Job - What Other Parts to Get? 200 1992

posted by  Dan Marino on  Tue Mar 26 07:37 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:46 CST 2014
[RELATED]

I'm prepping for my 2nd head gasket repair on my 1992 Volvo 240. I'm going to purchase a Volvo head gasket kit, but wondering what other parts I should order and/or replace while I'm doing the job?

I plan to take the head to a shop to have it inspected, cleaned, checked for level/ground flat, and have new oil seals and valve hushers installed.

For some added fun I'm installing a "T" cam into my normally aspirated engine to gain some low rpm pull.

The water pump is a month old.
I'm planning to go ahead and install a new timing belt and tensioner.
I'm thinking about purchasing new head bolts.
Radiator is in good shape as well as accessory belts.

Thanks,

13






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Prepping For Head Gasket Job - What Other Parts to Get? [200][1992]
posted by  Dan Marino  on Tue Mar 26 07:37 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.