Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2016 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

2" exhaust from VP on an early car 120-130 1961

posted by  Lennox on  Sat Mar 23 07:59 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:00 CST 2014
[RELATED]

I have a mid-'61 122s recently converted from B16 to B18 with a 2-pipe exhaust manifold. The car has the wider trans tunnel in anticipation of the B18/M41 that came later that year.

I sourced the 2" exhaust system from Veteranprodukter (made by Skandix, I think), which has a long sausage muffler in the middle, the pipe over the rear axle, and a single larger muffler at the back.

Does anyone have experience hanging this system on a 122 of any vintage? Can the hangers welded to the pipes be used, or does it require a completely custom setup when installing on an early car?

When the original pegs on the undercarriage are close, they are off to one side, which makes hanging with rubber rings difficult.

Colin
Portland






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2&quot; exhaust from VP on an early car [120-130][1961]
posted by  Lennox  on Sat Mar 23 07:59 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.