Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B 18 oil pump 444-544

posted by  gabbiano on  Thu Mar 14 10:34 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 29 20:18 CST 2014
[RELATED]

It appears that my engine will need lots work (bore, align bore, new cam and lifters, etc.) and I don't want to reinstall the old oil pump if there is ANY doubt about it. Specs call for "radial clearance of 0.08 to 0.14 mm", and is this the clearance between a gear tip and the interior wall of the pump? "Flank clearance of 0.15 to 0.35 mm", and I assume this means that this is the allowable spacing between the closest point of approach of the two adjacent gears. Anyone care to confirm or refute? Feasible to rebuild a pump or better to replace?

Many thanks!

Al






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B 18 oil pump [444-544]
posted by  gabbiano  on Thu Mar 14 10:34 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.