Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2007 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

122 to ES rear end 120-130

posted by  Volvo4dv8 on  Thu Feb 7 17:09 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 20:06 CST 2014
[RELATED]

I was thinking about swapping in a 1800ES rearend into my 69 122.
I measured both and the 122's is 1 and an quarter inch narrower than the ES.
the ES was 55 and 1/8. The 122 is 53 and 7/8.
So I decided not to do it due to the wheels I have and the fender clearance.
I know others have done this but they must have had different wheel offsets.
I wont be doing it, way to much hassle.
Comments?
Gary






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 122 to ES rear end [120-130]
posted by  Volvo4dv8  on Thu Feb 7 17:09 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.