Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2011 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tailgate anti-rattle kit. 900 1993

posted by  Onkel Udo II on  Fri Jan 11 13:43 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:50 CST 2014
[RELATED]

So I just installed half the anti-rattle kit on my shiny new wagon. I could not figure out how to use the "lower clips" that were provided. Thanks to Nick I had enough spare trim clips for the bottom.

Two improvements/further repairs I wish to do:

One of the lower tabs for the trim clip is completely missing and one other is cracked. I would like to repair this. First idea that comes to mind is relieve a small amount of the plastic and use fiberglass cloth and resin to form up a new tab. I am open to other suggestions.

Many of the mounts that you screw the aluminum plates to for the upper portion of the kit are is bad shape. If I am to be playing with fiberglass anyway, what do you thing of filling the open portion with mat and resin?

Already 100 million times better than it was and I might be better served by waiting to find a trim panel in better condition as this one even has a small impact hole from (probably) an object rolling around int he cargo area.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tailgate anti-rattle kit. [900][1993]
posted by  Onkel Udo II subscriber  on Fri Jan 11 13:43 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.