Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Volvo 740 cruise control engine bay wiring location and pedal switch 700 1989

posted by  stymes01 on  Sun Nov 4 23:35 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Dec 29 23:20 CST 2012
[RELATED]

Hi all, I am attempting to add cruise to my 89 GL 740 5 speed. I have installed the computer, vacuum pump, bellows and intake components. I am stumped as to the location of the wiring harness for the vacuum pump in the engine bay. is there some wiring I am missing? Is it bundled up somewhere I can't see? In the cabin? Any thoughts would be much appreciated.

Also I have a 5 speed I am supposed to have 2 switches on the pedals to cancel cruise. I only have a mounting tab for one switch in the footwell above the brake pedal. Any idea why I only have one mounting tab for this switch? I also only have one wire to go to this switch. Supposedly there should be 2. thoughts?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Volvo 740 cruise control engine bay wiring location and pedal switch [700][1989]
posted by  stymes01  on Sun Nov 4 23:35 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.