Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

O2 Sensors 200 1993

posted by  Oleseahorse on  Sun Nov 4 18:56 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:45 CST 2014
[RELATED]

Good Evening,

I see on ebay and Amazon, a slew of O2 sensors that appear to be the same three wire sensor as the Bosch 13034 which is the original sensor for my car. This is besides the 15737 universal Bosch 3 wire sensor that FCP indicates as OK for my 93 240. I should note, however, that the tip of the sensor looks a little different than what I recall for the sensors I've previously used.

I'm assuming that all these three wire Zirconia sensors are identical with the exception of the connectors. So for example, could I use a spliced in 13026 which I see for cheap on ebay?

Always lookin for a way to save a buck. Aren't we all?

Marty Wolfson

Proud member of the 300K club





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New O2 Sensors [200][1993]
posted by  Oleseahorse subscriber  on Sun Nov 4 18:56 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.