Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Crank position sensor does the brand matter? 200

posted by  Nel621 on  Fri Oct 19 18:54 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 12:48 CST 2014
[RELATED]

I'm having an issue with my 89 240 and have narrowed it down to the CPS or ignition module. I have a spare module and I'm going to replace the cps, mine has a small section of insulation missing although it has been taped with electrical tape. This car is giving me grief. It is a one owner 54k original mile car. I recently replaced a head gasket and then the trouble started. The ECU and Fuel pump relay went out simultaneously. Now I have another cranks but no start issue. Swapped computers again but still no go. This is the only thing left. Broad range in prices for the CPS depending on who makes it. Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crank position sensor does the brand matter? [200]
posted by  Nel621 subscriber  on Fri Oct 19 18:54 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.