Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2009 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

sway bar links overtightened 900 1993

I had a clunk in the front end and replaced a ball joint and did the sway bar links at the same time. The clunk seemed just as bad afterwards so I tightened up the sway bar top nuts to see if that would help. The car was as noisy and jarring as a dumptruck after that - I could feel very small parallel bumps on the roads! I loosened those nuts and all is well.

Ron
93 940
323 k km
near Brantford, ON, Canada






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New sway bar links overtightened [900][1993]
posted by  ronald subscriber  on Mon Jun 11 11:26 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.