Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2012 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Sealing an old rusty gas tank (Caswell?) 120-130

posted by  someone claiming to be Luke on  Tue May 1 18:11 CST 2012 [RELATED]

I posted this seperately from the salvage question because it's a different topic (I'm not sure of the protocol).

I have an old gas tank that seems really rusty on the inside, and has one spot with a couple small holes near (it's not rotten, but it would leak). I got a Caswell kit to seal the inside, but I just realized the tank has baffles throughout, making it impossible to clean the tank the way Caswell recommends (putting in a handful of screws with acetone and loosening the rust). I can't get all the loose material out as well.

What should I do? I'm worried I can't prep the tank the way I should, and that
I won't get even coverage with the Caswell due to the baffles.

Thanks for any help!

Luke







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Sealing an old rusty gas tank (Caswell?) [120-130]
posted by  someone claiming to be Luke  on Tue May 1 18:11 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.