Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Question about coils of wire in black connector above in-tank pump 200 1980

posted by  drj434343 on  Tue Apr 24 17:22 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 24 09:46 CST 2013
[RELATED]

I went to replace my in-tank pump and noticed the black connector above the motor had a bunch of wire pulled out of the coils inside the housing. It's really a mess now, and I hesitate to try and recoil those wires back in the container.

It appears they wanted some kind of air coil inductance built into the motor connection. Is there a reason for this? Can I eliminate this and make my own connector?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Question about coils of wire in black connector above in-tank pump [200][1980]
posted by  drj434343 subscriber  on Tue Apr 24 17:22 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.