Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 #1 spark plug difficult to align? 200

posted by  sparro on  Tue Apr 24 16:44 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 15:59 CST 2014
[RELATED]

Hello,

I am struggling with the spark plug replacement. I have 2 volvo 240s. I never had a problem changing last time.

This time I took out #1 spark plug (i.e. difficult one against the wall). Then I carefully screwed in a new one a little but realized that it was not going in right. So I took it out and found that the gap was pushed in a little. So I corrected the gap. I tried to put it back in but was not successful.

Visually I cannot see the obvious damage to the spark plug hole. Did I damage the thread in engine? The spark plug itself is fine, which I know for sure.

Is there any trick to align the spark plug? Should I force?

Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 #1 spark plug difficult to align? [200]
posted by  sparro  on Tue Apr 24 16:44 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.