Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Opinion on hacksawing around fuel filter 200

posted by  Bonzo on  Sun Apr 22 14:08 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 29 15:50 CST 2014
[RELATED]

My son was replacing the fuel pump & filter, and the 19MM banjo bolt on the filter became stuck or stripped. I got a used replacement banjo bolt, but I want to get out the fuel feeder line part (it's over $50 new, $78 or so from dealer). I might be able to cut the head off the banjo bolt, but was wondering if that would be dangerous around a fuel filter - is there a chance a spark would ignite fumes in the fuel filter? I took the other banjo bolt off to let the filter "air out". Opinions? Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Opinion on hacksawing around fuel filter [200]
posted by  Bonzo  on Sun Apr 22 14:08 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.