Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help identify pin I found when doing timing belt on a 940 900 1993

posted by  lrisius on  Sat Apr 21 18:15 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 17 05:59 CST 2014
[RELATED]

Hi,
I changed the timing belt on our "new" 940 today. While in there, I found a small pin that had fallen into the lip beneath the crankshaft gear. It's about 5/8" long, 1/4" in diameter, is shiny steel. The corners (at the ends) are rounded a little and the end is a little indented.

I can't figure out what it is. I looked things over pretty well and couldn't find anywhere that I thought it should go. I've owned 5 240/940s now and have done at least one timing belt on all of them and I don't think I've ever seen this before. I don't think it is anything related to the timing belt housings but it doesn't seem likely that something could have fallen inside the timing belt cover since it is fairly closed.

Any ideas?
Thanks!
Lyle






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help identify pin I found when doing timing belt on a 940 [900][1993]
posted by  lrisius  on Sat Apr 21 18:15 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.