Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Water pump pulley too close to head 900 1992

posted by  BrickDad on  Fri Apr 6 17:04 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:17 CST 2014
[RELATED]

Putting the 92 945T back together after a head gasket job. I've installed a new water pump but when I install the pulley on the pump it seems to scrape against the plastic of the timing belt cover and the grooves don't eyeball as lined up either. This has the electric fan so the pulley just bolts onto the water pump. I'm wondering if I need washers between the water pump and the pulley and then insert the bolts or lost some kind of spacer. I can't seem to find an exploded parts drawing to look at.

Brian Mee

92 945T
91 240
90 240 DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Water pump pulley too close to head [900][1992]
posted by  BrickDad  on Fri Apr 6 17:04 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.