Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Suggestions on patching dash crack 200 1986

posted by  Xraybob on  Mon Jan 23 12:58 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:32 CST 2014
[RELATED]

I recently picked up a near perfect dash with all necessary accessories from a '92 240 sedan. I want to install it into my '86 sedan. There is one crack to the left of the left defrost vent that can't be seen from the driver seat. It's about 2" long, 1/4" wide and 3/8" deep. What's the best way to seal this up and make it less noticeable overall? Thanks for looking.
--
'86 sedan with 471,000 miles on the original engine and automatic transmission






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Suggestions on patching dash crack [200][1986]
posted by  Xraybob  on Mon Jan 23 12:58 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.