Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

91 945 SE-Frt strut mount & bearing-OEM vs. aftermarket 900 1991

posted by  Sarki on  Tue Dec 27 14:43 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed May 7 05:39 CST 2014
[RELATED]

Replacing the front inserts on the wagon with Bilstein HD's. I was told it's a good time to also treplace the front strut mount/bearing as well. Heard horror stories of aftermarket strut mounts failing and going through the hood.....not good!
I see Autohaus AZ has a kit they label as OEM for way cheaper than FCP or others charge for OEM. The manufacturer is listed as "Lemfoerder" but they tell me that is OEM.
Anybody know if that is the case? Thoughts/experiences on this subject would be greatly appreciated. Hard enough to spend the $$ on the inserts let alone another $150-300 on the mounts/bearings.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 91 945 SE-Frt strut mount & bearing-OEM vs. aftermarket [900][1991]
posted by  Sarki  on Tue Dec 27 14:43 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.