Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Max pressure for a std. hose clamp?

uid 5322's pic
posted by  alschnertz on  Mon Sep 19 14:56 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:32 CST 2014
[RELATED]

I'm thinking of bypassing the leaking oil cooler lines on an 850.
Just want to use a piece of high pressure hydraulic hose and regular hose clamps on the ends. I'm not sure what pressure they're rated to - kind of doubt there's any rating. But still, they're fine with a cooling system, but those rarely ever see anything higher than 20 psi or so.

I think I would want at least 75 psi on an oil line. What do you think?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Max pressure for a std. hose clamp?
posted by  alschnertz subscriber  on Mon Sep 19 14:56 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.