Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can an old starter from an 86 work for a 90? 200

I pulled the starter from my parts car. Its not the gear reduction starter with the smaller body size. Wondering if it will work for my 90.

After 4 hours of attempting to remove the starter bolts I got the top one but the bottom won't budge. The 86 starter came out with no issues. I'm guessing someone removed the bottom bolt sometime in the past and found they couldn't remove the top one so they over tightened the bottom bolt. I've found a few too many bolts on this car I got early this year being over tightened.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Can an old starter from an 86 work for a 90? [200]
posted by  transit wind subscriber  on Tue Sep 6 00:12 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.