Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 fan belts 200 1987

posted by  Wiglaf on  Wed Aug 24 07:28 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 10 12:54 CST 2014
[RELATED]

I've changed the set of belts on 240's several times. Each time I remove the fan and cowling to do it, usually because I have some other purpose in there.

Just curious, is it possible to change that set of belts without removing the fan and cowling? In other words, can you just maneuver the belts over the fan and work them down under? Don't want to spend all day cursing if someone has already done it or not done it.

My last fiasco: The bottom bolt on the alternator BROKE- the one that is 6 inches long. The alternator tipped up and the fan hub ground nearly off the carriage bolt at the top of the alternator. One belt shredded and one stayed on. I limped in over 40 miles- a true testament to the 240's ability to get you there.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 fan belts [200][1987]
posted by  Wiglaf  on Wed Aug 24 07:28 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.