Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/1999 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Access in tank pump 945T 900 1993

posted by  htnelson on  Thu Aug 18 21:21 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Feb 20 22:33 CST 2014
[RELATED]

I have good reason to believe that the in tank pre pump hose is sucking air when the tank gets less than 1/3 full. That is when the check engine light comes on possible because of a lean mixture.

I want to pull the pump assembly and replace the hose which is probably 18 y/o

I have done this on my 245 and it involved detaching the back of the rear bench seat.

The rear seat on the 945 is much more substantial. I could not find a description of what is needed to access the opening for the in tank pump on a 945.

Any description/help would be appreciated before I start this project.

Thanks
Howard






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Access in tank pump 945T [900][1993]
posted by  htnelson  on Thu Aug 18 21:21 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.