85 740. Had the drivers side rear window motor go out. Had a couple spares from local PullaPart. You can remove the motor without removing the entire up/down assembly. 10mm Gearwrench. With window up, remove 3 bolts on the back side of the motor assembly. Motor drops out. Splice the wiring. Only 2 wires, red black. Slip the motor back in, 3 bolts you are done. There are 3 brass looking washers/spacers that sit in the plastic up/down mechanism. Make sure you put those back in. Check the motor tooth gear size. A couple motors I have, the gear is bigger than what I removed. Not sure what yr/etc they go to.
--
Post Back. That's whats makes this forum work.
|