Hi,
My oil pressure switch was acting up a bit, so today I replaced it. Before I did, I tested the oil pressure. At warm idle, it was 25 psi.When I acclerated to approx 2,000 rpm, pressure increased to 30psi and then slighly went back down to 25psi.
I drove the car around after replacing the switch and it runs normal, light does not flicker or come on randomly like before.
Should I be concerned about this low psi? Bentley shows minimum should be 36 psi and max of 87 psi. I was using a $3 oil pressure gauge from Harbor Freight...not sure how accurate those things are. Oil/filter changed 300 miles go, 10w 30.
Thanks
1990 Volvo 240 Wagon, 200K
|