Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Caliper Rebuilding 900

posted by  robertmfranklin on  Tue Jun 7 08:26 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 28 16:46 CST 2014
[RELATED]

Just soliciting opinions on Rebuilding Calipers. I did my first, yesterday, and although it was messy and required a bit of study before I figured out how the piston boot snapped into the proper grooves, it was not particularly demanding.

If course with FCP Groton selling a fully loaded replacement for approx. $60 less Brickboard 10% discount, its not an automatic decision. $15 for the rebuilding kit.

All I usually need is the piston boot. Usually, the boots on the sliding rods are salvageable. Seems like a waste of money to pay for a caliper when sometimes the only problem is the rod is frozen in the sliding bracket. And with Pep boys, I had to free that and reuse the bracket anyway ($46. no pads).

I'm sure many of you have tossed this one around. Opnions?

It may be os some relevant that I have a well appointed, well lighted workroom and I have time.

Bob Franklin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Caliper Rebuilding [900]
posted by  robertmfranklin subscriber  on Tue Jun 7 08:26 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.