Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2021 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Transmission output flange compatibilty. 200 1991

posted by  vacuumhead on  Wed Apr 27 11:25 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 06:49 CST 2014
[RELATED]

Replacing the aw70 in my 91 240 wagon with an aw70L out of a 92 240. From what I have read, you need to retain the alignment of the driveshaft with the output and pinion flange. That the driveshaft is integrally balanced with both flanges.
Are they compatible? Also the flange of the aw70 has some play in the bushing. Do I need to check the flange for wear? It does have over 250,000 mile on it. Are there signs of wear and tolerances I should check?
If I need to instead use the aw70L flange, do I need to have the drive shaft rebalanced and also include the pinion flange as well?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Transmission output flange compatibilty. [200][1991]
posted by  vacuumhead  on Wed Apr 27 11:25 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.