Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help with aftermarket sender wiring!!!!! 200

posted by  DEVO! on  Thu Mar 31 21:25 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 19 15:17 CST 2012
[RELATED]

ok i got my sender in the mail today and according to Art's write up the aftermarket sender wires + and - have to be switched. I checked mine and yes they were in the wrong place so i switched them.
I have a question about the 2 wires in the harness at the connector (please see pic)
They seem to backwards in the connector too should I switch these as well?
Do the wires from the sender have to match the wires in the harness?

The aftermarket plug is on the right the factory plug is on the left.
Photobucket
--
Dean






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Help with aftermarket sender wiring!!!!! [200]
posted by  DEVO! subscriber  on Thu Mar 31 21:25 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.